D-Link DIR-842 User Manual page 110

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Gigabit
Router
User Manual
In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their
priority. The first connection on the list serves as the main connection, the others are backup
connections.
To change the priority of a connection, left-click the relevant line in the table.
Figure 99. The window for changing the priority of a connection.
In the opened window, specify the needed parameters.
Parameter
Check with ping
Priority
After specifying the needed parameters, click the SAVE button.
Move the switch to the right to let the router use ICMP ping
mechanism for checking the connection.
Move the switch to the left to let the router check only the status of
the connection (may be useful for unstable connections).
The priority level of the connection. Level 1 is for the main
connection, the others are backup connections. Select the required
value from the drop-down list.
Page 110 of 233
Configuring via Web-based Interface
Description