Page 5
Screw part (F) in half,not all. Attach panels (1,2) to legs (3) with screws (F) .
Page 6
Step 1 Step 2 Screw parts (K1) into panel (8) ,then over cover (K1) with K2.
Page 7
Screw part (A) into panel (8); Insert dowels (C) into panels (1,2,5,6), then attach panels (1,2,5,6) to panel (8); Insert and secure cam lock (B) to panels (1,2,5,6) to lock it.
Page 9
Tighten the screws on the legs. Insert dowels (C) into panels (1,2,5,6) . then attach panels (4) to panels (1,2,5,6) with screws (E) ; Screw part (M) into legs (L),then attach legs (L) to panel (4) .
Page 10
Screw parts (I) into panels (1,2,4,8) . x 14...
Page 11
Attach panels (9) to panels (5,6) with screws (H) .
Page 12
Attach panels (J) to panels (10,11) with screws (D) .
Page 13
Attach panels (10,11) to panels (1,2) with screws (D) . x 16...
Page 14
·To adjust the vertical height. Loosen the four screws "A" on both hinges. Two of them are usually in slotted holes which mean and you can adjust up or down by a few mm. Then tighten back up. ·To adjust depth. Loosen screw"B"...