Hill-Rom Liko SafetyVest 93 Instruction Manual

The Liko SafetyVest is a sit-to-stand vest that is
unique in terms of safety, form and function.This vest
is designed to lift around the back and under the
arms. The inside is lined with a material that is inten-
ded to prevent the vest from sliding up on the body.
The waist belt, which is sewn to the vest, is a safety
feature that helps to avoid the risk of a patient sliding
out of the sit-to-stand vest.
You must use a combination of two loops on each
hook when attaching the sling to the lift.
The Liko SafetyVest is available in two models and
In this document, the person being lifted is referred to as the "patient" and the person helping them is referred to
as the "caregiver".
Caution triangles are used to warn of situations that demand extra care and attention.
Before using lifts and lifting accessories, read the instructions for both the sling and the lift that will
be used. Instruction guides can be downloaded, free of charge, at www.liko.com.
Liko SafetyVest™, Mod. 93, 94
Mod. 93

Product Description

Mod. 94
several different sizes. Model 94 is equipped with a
higher back to provide extra support for the back.
The Liko SafetyVest is mainly intended for use in
combination with the Sabina sit-to-stand lift with a
narrow slingbar (350-slingbar).
In combination with Sabina, the SafetyVest forms a
functional unit. For complete information and best
results, read the instruction guides for both products.
A complete understanding of the contents of these
instruction guides is essential, and the equipment
should only be used by staff who are fully informed.
Instruction Guide
English
7EN160146-03