Table of Contents
Advertisement
USER GUIDE
Beverage Connection
NOTE: Couplers not included
1.
Attach and clamp beverage tubing to tap couplers.
2.
Attach tap couplers to kegs. Locate notch and rotate clockwise
3.
Press down and rotate clockwise an additional
4.
Open valve on CO2 tank and adjust regulator to desired pressure by turning the handle clockwise.
General Installation
1/4
turn.
1/4
turn
1/4
turn.
1/4
turn
15
u-line.com
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UCDE224DSS03A and is the answer not in the manual?
Questions and answers