Table of Contents
Advertisement
USER GUIDE
Install Tower on Keg Refrigerator
Do not remove the protective film on the stainless exterior until the tower is installed.
1.
Remove four screws and lift off cap plug and gasket to reveal mounting hole on top of refrigerator.
Note: Save gasket and cap plug for conversion back to a standard refrigerator.
2.
Insert tap assembly tubing through the provided gasket and then all the way into the refrigerator.
3.
Insert and tighten four screws to secure tower to keg refrigerator.
4.
Install faucets onto the tower: Line up teeth on the outside of the faucets with the teeth inside the shank
5.
Screw the coupling nuts onto the faucets and tighten with the faucet wrench.
6.
Screw the handles onto the faucets.
General Installation
11
u-line.com
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UCDE224DSS03A and is the answer not in the manual?
Questions and answers