Table of Contents
Advertisement
Auto Select for
USB-C
Rename Inputs
Reset Input
Source
Color
│
42
Operating the monitor
Allows you to set Auto Select for USB-C to:
90W
• Prompt for Multiple Inputs: Always displays
the "Switch to USB-C Video Input" message
for you to choose whether to switch or not.
• Yes: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
NOTE: Auto Select for USB-C
only when Auto Select is on.
Allows you to select the input name for the selected
input source. The options are PC, PC 1, PC 2,
Laptop, Laptop 1, and Laptop 2.
NOTE: For Input with USB-C Charging, the wattage
value shall remain after renaming, e.g., PC 1
NOTE: Input names in warning messages, KVM, and
Display Info will not be changed.
Resets your monitor input settings to the factory
settings.
Use Color to adjust the color setting mode.
90W is available
90W.
Advertisement
Table of Contents
