Advertisement
Quick Links
0.6 m Round Latching SATA Cable
Product Diagram (SATRD60CM)
1
2
Part
• Connect a SATA Drive to a Computer
Latching SATA
1
Connectors
• SATA 7 pin - data only
2
Latch
• Prevents disconnections
• Color - black
• Length - 0.6 m
3
SATA Cable
• Wire Gauge - 30 AWG
• Compliant with SATA 6Gb/s specifications
Requirements
For the latest requirements please visit: www.startech.com/SATRD60CM.
• SATA Drive
• Computer
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
3
Function
Installation
• Connect the Latching SATA Connectors to the SATA Port on a SATA Drive and to
an available SATA Port on a Computer's Motherboard.
Operation
Disconnecting the Latching SATA Connectors
• Press and Hold the Latch on the Latching SATA Connectors and Pull gently.
Note: If you encounter resistance when attempting to remove the Latching SATA
Connectors, reposition your finger over the Latch and try again.
Quick-Start Guide
Manual Revision: July 15, 2020 1:40 PM
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for StarTech.com SATRD60CM
Summary of Contents for StarTech.com SATRD60CM
- Page 1 • Wire Gauge - 30 AWG • Compliant with SATA 6Gb/s specifications Requirements For the latest requirements please visit: www.startech.com/SATRD60CM. • SATA Drive • Computer To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support. Manual Revision: July 15, 2020 1:40 PM...
- Page 2 StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Need help?
Do you have a question about the SATRD60CM and is the answer not in the manual?
Questions and answers