Auxiliary Tools Area - infobit iWall 360 User Manual

Menu introduction:
Quick modification Angle, there are 4 angles to choose from, 0, 90, 180, 270.
"Horizontal Lock": the output can only move vertically and rotate;
"Vertical Lock": output can only move horizontally and rotate.
"Angle lock": Rotation is locked, output can move in any direction.
"Change display mode": changes the output signal type (DVI/HDMI).
"Move to Back": the output is placed at the background.
"Remove Monitor": delete this window.
Single output can be set up separately, and multiple (press Ctrl) output can be selected at the
same time.
This function is only used as an auxiliary function to interact with the device. The lock function
fails after the client reconnects the device.

(3) Auxiliary tools area

There is a sequence of icons on the top right of the "output" interface. This area is the auxiliary
tools area.
22