infobit iWall 360 User Manual page 19

Figure 5-18
The detail steps are as follow:
<1> Click to select the screen of the corresponding position in the four regions. After the screen is
selected, it turns black;
<2> Select the required rotating angle in the drop-down menu of the "rotating angle" (can
choose four angles);
<3>Click "adding the output screen to the wall". Observe the setting conditions in the area on the
right of "screen setting area Ⅰ";
<4>Clicking "reset" can delete the previous setting;
<5> Clicking "application", the settings take effect;
For example:
18