Table of Contents
Advertisement
Capricorn FLX Weather Station
85
________________________________________________________________________
SECTION 10: MAINTENANCE
In normal use, the Capricorn FLX should require very little maintenance.
In the event of any problems, follow the procedures contained in Section
11: Troubleshooting, to determine whether the unit is defective. If the unit
needs to be returned to the factory for repair, refer to the Return for
Repair Procedure in Section 12: User Support Information.
Console Maintenance
The Control Module contains sensitive electronic components and
should not be serviced by the user. If the power LED is not on; check for
proper installation of the wall mount power supply.
Barometric Pressure Sensor Maintenance
The barometric pressure sensor is located inside the enclosure and
should not be serviced by the user.
Temperature Sensor Maintenance
Check the temperature sensor cables during installation and periodically
thereafter to make sure they contain no cuts, kinks or other
abnormalities.
Standard Wind Sensor Maintenance
Note: Please refer to the Met One 034B wind sensor user manual for
detailed installation, calibration and maintenance information
R.M. Young Wind Monitor Maintenance
Note: Please refer to the R.M. Young 05103-11 Wind Monitor user
manual for detailed installation, calibration and maintenance
information
Relative Humidity Sensor Maintenance
The Relative Humidity sensor does not require any field maintenance.
Rain Gauge Maintenance
Periodically clean the Rain Gauge of any debris that might be clogging
the funnel or accumulating in the tipping bucket.
Columbia Weather Systems, Inc.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Capricorn FLX 034B and is the answer not in the manual?