Installation Overview; Unpacking The Unit - Columbia Weather Systems Capricorn FLX 034B User Manual

Capricorn FLX Weather Station
________________________________________________________________________

Installation Overview

Unpacking the Unit

Installing the Control Module
Installing the Mast
Routing the Sensor Cables
Installing the Barometric Pressure Sensor
Installing the Temperature & Relative Humidity Sensors
Installing the Wind Sensor
Installing the Optional Rain Gauge Sensor
Installing the Optional Solar Radiation Sensor
Unpacking the Unit
Unpack the Capricorn FLX weather station and verify that all parts are
included.
Inspect all system components for obvious shipping damage (Refer to
page 4 in case of damage).
Save the shipping carton and packing material in case the unit needs to
be returned to the factory. Note: If items are missing or if there is
damage, see page 4. If the system does not operate or calibrate
properly, see Section 10: Maintenance and Section 11: Troubleshooting,
for further instructions.
Unpack the Capricorn FLX weather station and verify that all parts are
included.
1. Standard system includes:
❑ Control Module
❑ (12) 3-position terminal blocks
❑ Power Supply
❑ Temperature Sensor with 50ft cable
❑ Relative Humidity Sensor with 50ft cable
❑ Self-Aspirating Radiation Shield for Temp & RH Sensors
❑ Wind Speed and Direction Sensor with 50ft cable
❑ 6-foot RS-232 cable + additional cable length if ordered
❑ User Manual
Columbia Weather Systems, Inc.
33