Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KASTDARIKLA
Summary of Contents for Kogan KASTDARIKLA
- Page 1 KOGAN ARIK SWIVEL TABLETOP TV STAND (SUITABLE FOR 45” – 65” TVS) KASTDARIKLA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, contact your local distributor for assistance. CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. - Page 4 COMPONENTS A (x1) B (x1) C (x1) D (x1) E (x1) F (x1) G (x6) H (x4) I (x1) M-A (x4) M-B (x4) M-C (x4) M-D (x4) M5x14 M6x14 M6x30 M8x30 M-E (x4) M-F (x4) M-G (x8) M-H (x8) M8x50 D5-D8 ø15xø8x5 ø15xø8x15...
-
Page 5: Mount Assembly
MOUNT ASSEMBLY Step 1 Secure the left and right stand base pieces (B, C) to the main stand (A) with the H screws, using the supplied Allen key (I) to tighten. Step 2 Attach the screw cover (F) and feet (G) to the base... - Page 6 Step 3 Loosen the main stand’s locking collar and resecure at the desired height for the upper mounting bracket. Recommended length from the stand edge is 50-150mm. Note: • Secure the locking collar (on the main stand, A) before attaching TV screen •...
- Page 7 INSTALLING BRACKET TO TV Align the upper and lower brackets (D and E) to your TV’s VESA holes and secure using supplied screws and spacers (“M-” components) depending on required length. Use a Phillips head screwdriver (not supplied) to secure the screws. Ensure the anti-toppling safety kit (“P-”...
- Page 8 SECURING TV TO MOUNT Place the TV with brackets installed onto the mount stand. Two people should carry the TV to prevent damage. Once in place, tighten the screw securing the clip on the lower mounting bracket (E). Use the openings in the stand assembly for cable management.
- Page 9 FIXING TO WALL TOPPLING FURNITURE WARNING: • It is strongly recommended that this product is permanently fixed to the wall. • Please seek professional advice if you are in doubt of what fixing device to use. • Regularly check that anchors are securely maintained. •...
- Page 10 Position the bracket in line with the pilot hole and secure to the wall using screw (P-E). Do not use the wall anchors. Thread the cable (P-A) through the cable clips (P-B) and the bracket (P-C). Secure the fasteners (P-D) using a Phillips head screwdriver.
- Page 11 Masonry / concrete: Using a pencil and spirit level, mark the desired position for the anti-toppling bracket (P-C) on your wall. Using a drill, create the pilot hole. Use a ø7mm or 9/32” drill bit, drilling 40mm deep. Insert wall anchor (P-F) into the drilled hole. Position the bracket in line with the pilot hole and secure to the wall using screw (P-E).
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the KASTDARIKLA and is the answer not in the manual?
Questions and answers