Intermec 074788 Series Instructions

The printer shoulder strap (P/N 074788-xxx) provides you with a convenient way to
carry your PB21, PB22, PB31, PB32, PB42, PB50, PB51, or PW50 printer. The wide
padded strap makes it comfortable to wear the printer for long periods of time.
The shoulder strap kit contains these parts:
• Shoulder strap accessory
• These instructions
To attach the shoulder strap to the mobile printer (PB2X, PB3X, PB4X, PB5X)
1 Install the handstrap on the printer.
2 Orient the shoulder strap so that the textured side of the strap padding is facing
toward the printer. You want the textured side of the padding to sit on your
shoulder when the strap is installed.
3 Attach the snap hooks on the ends of the shoulder strap to the D-rings on the
handstrap.
You are now ready to use the printer with the shoulder strap accessory.

To attach the shoulder strap to the PW50

1 Orient the shoulder strap so that the textured side of the strap padding is facing
toward the printer .You want the textured side of the padding to sit on your
shoulder when the strap is installed.

Printer Shoulder Strap Instructions

D-ring
(2 places)
Handstrap
Shoulder strap