Connecting A Reader To A Computer Using Usb; Connecting A Reader To A Computer Using Ethernet - Magellan MARS-1-2-4-6 User Manual



4.1.2Connecting a Reader to a Computer using USB

Connect the MARS Reader to a host computer using the USB data
communication cable by plugging the USB cable into the MARS USB device
port and the host computer USB port.
!

4.1.3Connecting a Reader to a Computer using Ethernet

Connect the MARS Reader to a host computer using a cross over Ethernet
cable. Plug the Ethernet communication cable into the MARS RJ45 socket
(Ethernet port) and the network interface port on the PC.
!
MARS-1-2-4-6 USER MANUAL
once the unit is in an operational mode the
green LED will flash every time a tag/tags is/are successfully read
LEDs are controlled by the MARS Reader
software
Only one Magellan Reader can be connected to
the PC via USB at a time (limited by Windows).
When the USB connection is used only a screened USB cable
should be used.
MARS with the USB communication cable and power cable
Always connect Ethernet cable before power is applied to the
Reader.
red LED
24
will remain lit the
64-70-017-DOC ver.1