Solutions When "No Signal" Message Appears - Epson EpiqVision Ultra LS800 User Manual

Related references
Projector Light Status
Projector Feature Settings - Settings Menu
Image Quality Settings - Picture Menu
Related tasks
Connecting to an HDMI Video Source
Resetting the Projector

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
• Press the
sources. Wait a few seconds for an image to appear.
• Press the
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
• Connect the video source directly to the projector.
• Check that the source device is not sending a signal that has too high a bandwidth for the cable or the
projector. Click the link below to see the supported video display formats.
• If the other solutions do not solve the problem, reset all of the projector settings using the option on the
Android TV Settings menu.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Parent topic:
Related concepts
Projector Connections
Related references
Supported Video Display Formats
Source Search button on the remote control and then select from the displayed
gaming mode button on the remote control to select the HDMI3 (Game) input source.
Solving Image or Sound Problems
115