Epson EpiqVision Ultra LS800 User Manual page 142

personnel. Electrical voltages inside the projector can cause fire, electrical shock, or serious injury to
occur.
• Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the
following conditions: if it does not operate normally when you follow the operating instructions, or
exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the
projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the
projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been
damaged. Continuing to use the projector under these conditions may result in fire, electric shock, or
even damage to your eyesight. Do not try to repair this projector yourself. Place the projector near an
easily accessible outlet so that the plug can be unplugged immediately when an error occurs.
• Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.
• Unplug the projector when it will not be used for extended periods. The insulation may deteriorate,
which may result in fire.
• Do not use the projector where it may be exposed to rain, water, or excessive humidity. Fire or electric
shock may result.
• Do not install the projector in locations where it may be subject to salt damage or corrosive gas. Doing
so may result in malfunction and the corrosion may cause the projector to fall.
• Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases,
excessive dust, vibration, or shock.
• Do not use the projector in places where chlorine and mineral components contained in tap water may
be atomized, particularly near ultrasonic humidifiers; otherwise, malfunctions may result or the quality
of the projected image may decline.
• Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely affect the quality of the projected images.
• Do not use the projector where flammable or explosive gases may be present.
• Do not use sprays containing a flammable gas to remove dirt or dust from parts such as the lens or the
air filter. The inside of the projector can get very hot during use and the gases may ignite, resulting in a
fire. Use a vacuum or hand-operated air blower to remove dirt or dust that has adhered to parts such
as the lens or the air filter.
• Do not use or store the projector or remote control with its batteries in a hot location, such as near a
heater, in direct sunlight, or in a closed vehicle. Thermal deformation or technical malfunction may
occur, which may result in a fire.
• Check the specifications for the power cable. Using an inappropriate power cable could result in fire or
electric shock. The power cable supplied with the projector is intended to comply with power supply
142