Pairing The Remote Control; Selecting An Image Source - Epson EpiqVision Ultra LS800 User Manual

1. To use voice commands with your projector using your remote, press and release the
then say the command you want to perform.
You can use voice commands to search for actors or shows, open installed apps, and control media
playback.
2. To use a Google Home device to send voice commands to your projector, link the device with your
projector using the Google Home app. You may also need to link streaming apps to your Google
account. For detailed instructions, go to your device's support page.
Parent topic:
Related tasks

Pairing the Remote Control

Pairing the Remote Control
To use Android TV and video-on-demand features, you must pair the remote control to the projector.
Note: When you first turn on the projector, instructions for pairing the remote control are displayed on
the screen. Make sure to point the front of the remote at the front of the projector when attempting to pair
the remote.
1. Turn on the projector.
2. When the pairing screen is displayed, press and hold the
control until the indicator starts blinking.
A message appears on the screen and the indicator stops blinking when the remote control is
paired.
Parent topic:

Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Do one of the following:
• Press the
(ARC) image source. Use the directional pad to select the image source and press Enter.
Using Basic Projector Features
Using Basic Projector Features
Source Search button on the remote control to select either the HDMI1 or HDMI2
home and Enter buttons on the remote
57
mic button,