Removing The Dimm Baffle - HP Synergy 480 Gen10 User Manual

Removing the DIMM baffle

Removing the DIMM baffle
Procedure Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
IMPORTANT: When removing the right DIMM baffle, leave the Smart Storage Battery installed on the baffle. IMPORTANT:
Use the blue pull tab to disconnect the Smart Storage Battery cable from the system board.
5. Remove one or more DIMM baffles.
Removing the DIMM baffle 39