Goldanalytix GoldScreenBox Instruction Manual page 24

Metal selection page 2:
1/10 Gold 916 (A)
1/10 Gold 916 (B)
5 g Goldbars 999
2 g/2,5 g Goldbars 999
1 g Goldbars 999
Platinum 999.5
Palladium 999.5
Type
Above 17 mm please use the mode "Au 999" (Type A), e.g. for the Lunar 2 series and the China Panda 1/10
M
1/10 ounces of "Type C" - alloy of 916 gold and 84 copper - e.g. Krugerrand 1/10 and other coins of this
Type N
Type O
5 gram gold bar (minimum size 22.5 x 13.5 mm) → Press lightly in the blister, always use the side where the
plastic is closer to the metal. Please note that with particularly thick blisters/packaging the measured value
drops too much, making measurement more difficult. Therefore it is always advisable to place the small bars
Type P
without packaging - the blister packs of the manufacturers Degussa, Umicore, Heraeus, Valcambi proved to be
suitable during our tests - NGC bars often had too much air inside the packaging. Pay particular attention to a
centred alignment in the measuring circle - these instructions also apply to the following types "Q and R"
Most 2 gram and 2.5 gram gold bars (minimum size 19 x 11 mm), see instructions for type P
Type Q
Type R 1 gram gold bars of minimum dimensions 14.8 x 8.5 mm, see instructions for type P
Type S
Type T
Type U
22
Designation
1/10 Gold 999
Rhodium 999
1/10 ounce with diameter 16 to 16.9 mm e.g. Lunar 1, Maple Leaf, Kangaroo
composition with diameters 16.3 to 17 mm
1/10 ounce of the "Type D" - e.g. the American Eagle 1/10 ounce
Common platinum coins (Maple Leaf, Vienna Philharmonic, etc.), 999.5 bars
Standard palladium coins (maple leaf, Russia ruble, etc.), 999.5 bars
Rhodium bars 999.0 1 ounce and coins e.g. Tuvalu 100 dollars Rhodium 999.0
Conductance
Type
[MS/m]
M 41.0
N 9.5
O 10.9
P 40.8
Q 31.5
R 14.5
S 9.1
T 9.2
U 18.5
ounce (d=17.4 mm)
Fineness Density
3
[‰] [g/cm ]
999.9 19.3
916 17.5
916 17.8
999.9 19.3
999.9 19.3
999.9 19.3
999.5 21.45
999.5 11.99
999 12.38