®
™
Anybus
Communicator
- EtherNet/IP
6.8. Apply Configuration
Before You Begin
NOTE
When you apply the configuration, any existing configuration is overwritten.
Figure 28.
Before you can apply the configuration, ensure that there is no active communication on the EtherNet/IP
network or the PROFIBUS network where the Communicator is connected.
Procedure
To make the settings take effect, download the configuration to the Communicator:
1.
In the web-interface header, click Apply
2.
To confirm download, click Apply.
The configured settings are downloaded and applied to the system.
Page 36 of 60
™
Adapter to PROFIBUS DP Device
Apply Configuration
SCM-1202-200 Version 1.0