HMS Networks Anybus Communicator ABC4014 User Manual page 20

® ™
Anybus Communicator - EtherNet/IP
To Do Next
Connect the Communicator to power. See
Figure 9. Connect Communicator to power
Result
The set node address is active as soon as the Communicator is powered on.
NOTE
Changing the address settings on the rotary switches during operation is ignored. For a new address
to take effect, power cycle the Communicator.
Page 16 of 60
™
Adapter to PROFIBUS DP Device
Connect to Power (page 17).
SCM-1202-200 Version 1.0
Rotary Switch Settings