Connection Settings - HMS Networks Anybus Communicator ABC4014 User Manual

® ™ ™
Anybus Communicator - EtherNet/IP Adapter to PROFIBUS DP Device EtherNet/IP Settings
Naming the Host
Figure 19. IP Settings Hostname
You can label the Communicator.
• The maximum allowed length of the Hostname is 64 characters.
• No symbol characters, punctuation characters, or whitespace are permitted.
• Write the Hostname as one single word.

6.5.2. Connection Settings

Figure 20. EtherNet/IP page, Connection settings
When the EtherNet/IP Client (PLC) opens a connection to the Communicator, it specifies an I/O data size.
By default the Communicator is set to Accept Only Matching I/O Sizes.
The connections must match the I/O size configured on the EtherNet/IP page, refer to To Use Automatic I/O Sizes
and To Configure I/O Sizes Manually.
You can change to Accept All Connections.
The Communicator will accept all connections with an I/O size that is equal to or smaller than the configured I/O
size in the Communicator.
Page 30 of 60 SCM-1202-200 Version 1.0