Table of Contents
Advertisement
®
™
™
Anybus
Communicator
- EtherNet/IP
Adapter to PROFIBUS DP Device
Connect to EtherNet/IP Network
5.3. Connect to EtherNet/IP Network
Figure 5. Connect to EtherNet/IP network
1. Connect the Communicator, upper connector, to your EtherNet/IP network.
To Do Next
Connect the Communicator to the PROFIBUS network, set the node address on the rotary switches and connect
to power.
Check LED status, refer to
Communicator LED
Indicators.
Page 10 of 60
SCM-1202-200 Version 1.0
Advertisement
Table of Contents
