HMS Networks Anybus Communicator ABC4014 User Manual page 33

EtherNet/IP Settings
To Configure IP Settings Manually
Figure 18. EtherNet/IP IP Settings, DCHP disabled
1. Deselect the DHCP enabled checkbox.
2. Configure the IP settings.
Setting Description
IP address The EtherNet/IP network IP address in IPv4 dot-decimal notation
Subnet mask The EtherNet/IP network Subnet mask in IPv4 dot-decimal notation.
Gateway address The EtherNet/IP network Gateway address in IPv4 dot-decimal notation.
If there is no gateway available, set the Gateway address to: 0.0.0.0
Primary DNS server The EtherNet/IP network Primary DNS in IPv4 dot-decimal notation.
Secondary DNS server The EtherNet/IP network Secondary DNS in IPv4 dot-decimal notation.
DHCP Enabled
If you change a value and click Refresh, the value is reset to the last applied value.
SCM-1202-200 Version 1.0
® ™
Anybus Communicator - EtherNet/IP
™
Adapter to PROFIBUS DP Device
Page 29 of 60