Related Manuals for JWA CLYDE 68721
Summary of Contents for JWA CLYDE 68721
- Page 1 ASSEMBLY INSTRUCTION CLYDE COFFEE TABLE ITEM CODE 68721 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4.
- Page 3 PARTS LIST Tray table x 2 Dark Tempered glass x 1 Clear Tempered glass x 1 Bars x 2 Tabletop frame x 1 Leg frame x 2...
- Page 4 STEP 1: • Prepare a surface with a protective blanket or cardboard. • Connect the 2x leg frames(6) together with the 2x bars(5), as shown below. Secure with bolt(A) at the connection points. Fasten with allen key(B). • Place the tabletop frame on, secure with bolt(A). Fasten with allen key(B).
- Page 5 STEP 2: • Place the frame onto a level surface. • Press down on the corners until the frame levels out. Do not lean beyond your own balance. • Once level, go around and fully tighten all the bolts. STEP 3: •...
- Page 6 STEP 3: • Place the 2x tray tables(1) on the table. ASSEMBLY IS COMPLETE...
- Page 7 PRODUCT CARE: If the glass is chipped or broken, stop using the product and consult place of purchase WARNING: • Do not place very hot or cold items on the glass surface unless adequately thick table mats are used to prevent such items coming in contact with the glass •...
Need help?
Do you have a question about the CLYDE 68721 and is the answer not in the manual?
Questions and answers