Cables - Maretron N2KMeter User Manual

Warning: Changes or modifications not expressly approved by Maretron could void the user's
authority to operate the equipment.
Industry Canada
This Class (A) digital apparatus complies with Canadian ICES-003.
Marking of this equipment with the symbol CE indicates compliance with European Council
Directive 89/336/EEC - The EMC Directive as amended by 92/31/EEC and 93/68/EEC.
Note: To maintain compliance with the limits and requirements of the EMC Directive, it is required
to use quality interfacing cables and connectors when connecting this device. Refer to the cable
Network Designer's Guide for selection of cable
®
specifications in the Maretron NMEA 2000
types.
This device meets or exceeds the requirements of the following standard:
EN 61326:1997 including amendment A1:1998 - "Electrical equipment for measurement, control
and laboratory use - EMC requirements."
Warning!
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Caution!
This equipment is neither designed for, nor intended for operation in installations where it is
subject to hazardous voltages and/or hazardous currents.

19 Cables

The N2KMeter is designed for use with the supplied cable or the following Maretron replacement
cable: CM-CG1-CF-01.0.
Page 26 Revision 1.3