The packaging procedure is as follows.
1) Put the probe into TYVEK pouch.
2) Seal the TYVEK Pouch using a heat sealer.
Ensure that the seal is complete.
3) Put the sealed pouch into a tray or plastic
mesh wire for sterilization.
Attachment
Fig.18 Packaging in the pouch
TYVEK Pouch
Attachment
Fig.19 Sealing
Tray for
sterilization
Probe in the Pouch
Fig.20 Packaging in a tray
‐23‐
Probe
TYVEK Pouch
Sealed
Probe
Q1E‐EP1430