4.2.2
How to release EZU‐RV3S
The procedure of releasing the magnetic sensor EZU‐RV3S is as follow.
1) Detach the Magnetic sensor attachment from the probe as shown Fig. 15.
2) Detach the magnetic sensor from the Magnetic Sensor Attachment as shown Fig. 16.
Clean, disinfect and sterilize the Magnetic Sensor Attachment prior to the first use as it is
not sterilized when delivered.
Fig. 15 How to release the Magnetic
Sensor Attachment from the probe
Fig. 16 How to release magnetic sensor
from the Magnetic Sensor Attachment
CAUTION
‐15‐
Q1E‐EP1430