Hitachi EUP-V73W Instruction Manual page 19

4.1.2 How to release EZU‐RV2S
The procedure of releasing the magnetic sensor EZU‐RV2S is as follow.
1) Detach the Magnetic Sensor Attachment from the probe as shown Fig. 10.
2) Detach the magnetic sensor and the Spacer for EZU‐RV2S from the Magnetic Sensor
Attachment as shown Fig. 11.
Clean, disinfect and sterilize the Magnetic Sensor Attachment and the Spacer for
EZU‐RV2S prior to the first use as they are not sterilized when delivered.
4.2 Magnetic sensor EZU‐RV3S
EZU‐RV3S as shown in Fig. 12 is the magnetic sensor for EUP‐V73W.
Fig. 10 How to release the Magnetic
sensor attachment from the probe
Fig. 11 How to release magnetic sensor
from the Magnetic Sensor Attachment
Direction mark
Fig. 12 Magnetic sensor (EZU‐RV3S)
CAUTION
Magnetic Sensor
(EZU‐RV3S: white)
‐13‐ Q1E‐EP1430