Backing Up My Content; How Do Istart Using My Clickfree I Pod Transformer - Clickfree iPod Transformer User Manual

Clickfree iPod Transformer User Guide

Backing up my content

H I
OW DO START USING MY
♦ To start using your Clickfree iPod Transformer:
1. Make sure that your computer is switched on and has finished starting up.
2. Log in, if that is what you normally do.
3. Connect the
port on your computer.
A USB port usually looks like this:
it. USB ports are usually found at the back and front of a desktop computer, often in
pairs. On a laptop computer they may be at the back, front or side.
4. Wait for the
your computer to recognize the
5. Connect your iPod to the
6. You may have to wait up to a full minute again for your computer to start to run the
ClickFree
The first time you attach
screen telling you that your computer has found new hardware. The messages may
mention ClickFree, Disk drive, and/or CD-ROM drive. You don't need to do anything
about these messages. Most likely you will not see them when you attach
next time.
Copyright © 2009 Storage Appliance Corporation.
C
LICKFREE I
Clickfree iPod Transformer to your computer by plugging it in to a USB
Clickfree window to appear. You may have to wait up to a full minute for
Clickfree
Clickfree
program – please be patient!
Clickfree
P T
OD RANSFORMER
and frequently has a symbol
iPod Transformer.
iPod Transformer using your iPod's USB cable.
to your computer, some messages appear on the
Backing up my content
?
Clickfree
beside
the
10