How Do Ilet Clickfree Restore Decide What To Restore And Where - Clickfree HD225 User Manual

Clickfree Portable Backup Drive User Guide
computer's hard drive where they will not replace the files you already have.
For details, see:
"How do I let Clickfree restore decide what to restore and where?" on page 23
•
"How do I change how Clickfree restores content?" on page 27
•
H I C
OW DO LET LICKFREE RESTORE DECIDE WHAT TO RESTORE AND WHERE
You can allow Clickfree to make the decisions about what to restore and to where, but you
need to confirm what Clickfree plans to do.
♦ To let Clickfree
1. Make sure that your computer is switched on and has finished starting up.
2. Log in, if that is what you normally do.
3. Connect the
of the USB cable to the drive and the other end to a USB port on your computer.
Please try to connect to a USB port on the computer itself, using a USB hub may not
provide enough power
Clickfree
4. Wait for the
The Clickfree
used it to back up your content.
But this time you are not going to allow
Because you have backed-up content on your Portable Backup Drive, the countdown
screen now shows buttons at the bottom to allow you to
Copyright © 2009 Storage Appliance Corporation.
decide what to restore and to where:
Clickfree Portable Backup Drive to your computer by connecting one end
starts up just as it did when you used it to back up your content.
Clickfree window to appear – this may take up to 60 seconds.
Welcome window appears with the countdown, just as it did when you
Clickfree to start the backup.
View Files
Restoring my content
?
and Restore files.
23