iLIVE IAEBT411 - Truly Wire Free Earbuds Manual

Overview

1. Charging Contacts
2. Function Touch Pad
   Note: The Function Touch Pad is sensitive and must be touched or tapped to operate properly.
   • Tap and hold for 5 seconds to power ON/OFF.
   • Tap to play/pause music.
   • Tap to answer/end phone calls.
   • Tap and hold for 2 seconds to reject incoming calls.
   • Tap and hold for 2 seconds to activate Voice Assistant (LEFT).
   • Press and hold for 3 seconds to switch modes between: Normal, Transparent, and ANC (RIGHT).
   • Quickly tap twice to skip to next track (RIGHT ).
   • Quickly tap twice to play previous tracks (LEFT).
   • Quickly tap three times to turn volume up (RIGHT).
   • Quickly tap three times to turn volume down (LEFT).
3. Earbud Indicator LED/Microphone
   Red when charging.
   Lights off when fully charged.

NOTE: Each earbud must be powered on separately.

Charging the Earbuds

1. Open the cover and place the earbuds on the charging contacts. Be sure to match the left and right earbuds with the correct docking station in the case.
   
2. When charging, the Power Indicator LED on the bottom of the case will turn blue. When charging is complete, the indicator LED will turn off.
3. Earbud Indicator LED will turn red when charging. When fully charged, the LEDs will turn off.

Charging the Case

The earbuds have a total battery life of approximately 5 hours at 50% volume with ANC off. To charge the case, use the USB-C to USB cable (included), to connect to the USB port of a powered on computer or USB power adaptor (not included). When the case is charging the Power Indicator LED will flash red. When fully charged the LED will turn red. The total charge time is approximately 2 hours.

Pairing Bluetooth

Note: When earbuds are powered on they automatically link and enter into pairing mode. You can power on a single earbud to use as a single unit if you wish.

1. With the earbuds linked, you can now connect to your Bluetooth device. The LED indicator on the right earbud will continue flashing blue and red, indicating it is ready to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings and search for nearby devices. Select IAEBT411 when it is discovered. When successfully connected to your Bluetooth device, the LED indicator on both of the earbuds will flash blue, slowly and a voice prompt will announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.

PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz bands or in high wireless traffic areas.

Active Noise Canceling & Transparent

The Active Noise Cancellation feature will electronically mute background noise. It can be used to enhance the quality of any music or audio that is playing through the earbuds.

Transparent Mode enables the earbuds to pick up external sounds, so you can stay aware of your surroundings.

Note: Both of these modes will affect battery life.

Speakerphone

• To accept or end a phone call, press the Function button.
• You can also use the controls on the connected phone to handle phone functions.

Charging Case & Auto-On Feature

While the case power is ON:

• Placing the earbuds in the charging case will automatically power them off and begin charging.
• Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).

Customer Support

Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com

For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com

Copyright © 2021 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FCC Warnings

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• 
  To prevent fire or shock hazards, do not expose this unit to rain or moisture.
• 
  Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.