![]()
Features
- Rubberized coating
- Sweat proof
- Bluetooth Wireless: range 33 ft.
- Active noise cancellation
- Built-in microphone
- Voice prompts announce earbud operations
- Digital volume control
- Built-in rechargeable battery: aprroximately 4 hrs playtime
- Micro-USB port for battery recharge
Includes
- 3 pairs of eartips: 1 small, 1 medium, 1 large
- Micro-USB to USB charging cable
Battery Charging
- Pull back the cover on the DC Power Input.
- Using a Micro-USB to USB cable, connect to the USB port of a powered on computer or USB power adaptor (not included).
![iLive - IAEB29 - Battery Charging Battery Charging]()
Initial charge time is approximately 2 hours. Charge fully before use.
When the battery is low an indicator LED will flash red for 1 minute and a voice will announce "Low Battery, " then the unit will automatically power OFF.
While the unit is charging it will display a solid red light. When the unit is fully charged it will display a solid blue light.
Orientation & Controls (Right Earbud only)
Volume / Skip
Press and hold to adjust volume.
Press to skip ahead or back.
Power / Pair / Play / Pause /Speakerphone
Press and hold to power ON or OFF. Press and hold for 9 seconds to power ON and pair Bluetooth. Press to play or pause audio. Press to answer incoming phone call.
Initial Bluetooth Connection
- With the earbuds powered OFF, press and hold
until they power ON and the voice prompt says "Power on...Bluetooth is connecting." When pairing, remain within 3 feet of the Bluetooth device. - Using the controls on your Bluetooth device, select IAEB29 in the Bluetooth Settings to pair. If need be, refer to the user's manual for your specific device for more information.
- When successfully paired, a voice will announce "Bluetooth is connected" and the LED indicator will blink twice every few seconds. Audio from the connected Bluetooth device will now be heard through the earbuds.
- Use the controls on the connected Bluetooth device to select and play audio. Use the earbud controls or the connected Bluetooth device to play, pause, and adjust the volume level.
- After initial pairing, press and hold
until the voice prompt says "Power on." The earbuds will power ON and automatically connect to the Bluetooth device.
Speakerphone
- To accept a call, press the
button, or use the controls on the connected phone. - To end a call, press the
button, or use the controls on the connected phone. - To re-dial the last dialed number, press the
button twice.
Previously Connected Devices
- The earbuds can remember multiple Bluetooth devices and will always try to re-connect to the last device used.
- To re-connect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select IAEB29.
Troubleshooting
If the earbuds should become unpaired or will not connect normally, follow these steps in your device's Bluetooth Settings Menu.
- Delete the earbuds ("Forget This Device").
- Turn Bluetooth OFF then ON again, and repeat the Initial Bluetooth Connection steps.
Customer Support
Customer Service: 1-888-999-4215
Email Support: prodinfo@ dpiinc.com
Email Parts: partsinfo@dpiinc.com
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com
![]()
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Need help?
Do you have a question about the IAEB29 and is the answer not in the manual?
Questions and answers