iLive Truly Wire Free Earbuds IAEBT449 User Manual

Truly Wire Free Earbuds
User's Guide for Model IAEBT449 v2256-01
Earbud Controls
Controls and features are the same for both earbuds.
Earbud Indicator LED
Red when charging.
Blue when fully charged.
Function Button
Press and hold to power ON.
Press to play/pause audio on
Bluetooth device.
Press and hold to power OFF.
See reverse side for more
detailed instructions.
Microphone
Charger Power ON
Case will automatically
power off when not in use.
Charging the Earbuds
For best results, charge fully before use. Charging time is
approximately 2 hours.
1. Open the cover and place the earbuds in their docking
stations (note Left and Right placement).
2. Close the case to ensure the contact between earbuds
and the case.
3. Use the Power switch on the case to power it ON and
begin charging the earbuds.
• While charging, the indicator on the earbuds will
turn red.
• When charging is complete, the indicator will turn
blue. After 5 minutes, the indicator and the case
will power off.
NOTE: Each earbud must be
powered on separately.
Once they are linked, powering off
one earbud will power off both.
L
Charger DC Power Input (rear)
Charging the Case
For best results, charge fully before use. Charging time is
approximately 2 hours.
Using a Micro-USB to USB cable, connect to the USB port of a
powered on computer or USB power adaptor (not included) to
charge the case.
Earbud Charging
Contacts
Charger Power & Battery
Indicator LED
Flashing blue when case is charging.
Solid Blue when case is ON.
Individual LEDs show battery level.