Zontes ZT125/310T-M Maintenance Manual page 167

d. Install the semi-circular key in the groove of the lower
link plate, then align the gap between the spacer and the
base with the semi-circular key, and finally screw in the cap
nut, torque: 100N.m (10.2 kgf.m, 74 bf.ft)
6. Install other disassembly components
a. Refer to "Replace the front shock absorber" to replace
the front shock absorber.
b. Refer to "Replace the front wheel" to reinstall the front
wheel assembly.
c. Refer to "Replace the direction handle" to install the
assembly back in the direction.
●The vehicle must be parked on a level and stable ground or
on a lifting platform.
167 / 188