Symbol CRD3100-1000 Quick Reference page 63

63
TELECOM APPROVAL WARNINGS AND NOTICES
This product contains Symbol Modem Type IM8
Connecting to the telephone network
A compliant telephone lead is required with RJ11 plug (line is on middle pair) for connection
to modem, terminated with an appropriate and correctly wired local telecom connector
compatible with the telephone network. Such a cable may be sourced from your local supplier.
Alternatively, compliant RJ11 plug to RJ11 plug cables may be used with a range of adapters
for places such as Europe.
CAUTION: To reduce risk of fire, use only No. 26 AWG or larger telecommunication line
cord.
User and Service Access - No part of the modem, other than the line connection plug, is
accessible to users.
United States
Where this device contains a Symbol Technologies, Inc. internal modem, the label on the
equipment exterior will contain a number in the form US: 1K0DTabcXXXX. This will indicate
the equipment meets the requirements of FCC 47 CFR Part 68, including those published by
ACTA. Where 'ab' is the Ringer Equivalence Number with decimal point, 'c' is the ringer type
letter and 'XXXX' is model number.
The REN is used to determine the quantity of devices which may be connected to the telephone
line. Excessive RENs may result in the device not ringing in response to an incoming call. In
most but not all areas, the sum of the RENs should not exceed 5.0. To be certain of the number
of devices that may be connected to the line (as determined by the total number of RENs)
contact the local telephone company.
This equipment is designed to be connected to the telephone network or premises wiring using
a compatible modular jack (RJ11C) that is FCC Part 68 compliant. A FCC compliant
telephone cord and modular plug must be used.
Should you experience trouble with this telephone equipment, please contact your facility's
Technical or Systems Support first who will contact your nearest Symbol Customer Service
Centre. If necessary, the Symbol Support Centre may be contacted at: 1-800-653-5350
If the modem causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. However, if advance notice
is not practical, you will be notified as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the modem. If this happens the telephone
company will provide advance notice so you may make any necessary modifications to
maintain uninterrupted service.
Fax