Corsair iCUE ELITE LCD UPGRADE KIT Manual

INCLUDED HARDWARE

LCD Module

x1 USB Y-Splitter

x4 Mounting Screws

COMMANDER CORE UPDATE

1. Please ensure you've updated your Elite Capellix's firmware PRIOR to installation. Failure to update firmware will result in Commander CORE not recognizing the LCD Kit. The LCD will then return a general fault (!) error.
   Please ensure you power down your entire PC before installation. This product, the pump, and the Commander CORE are sensitive to hotplugging and ESD.
2. In iCUE, click on your Commander CORE or ELITE CAPELLIX cooler and select 'Device Settings'.
   Under 'Device Settings' you will have the ability to check for firmware updates.
   

PREPARING COOLER

1. 
   
2. 
   
3. MOUNTING SCREW INSTALLATION
   
4. ELITE LCD MODULE INSTALLATION
   

PLUG INTO COMMANDER CORE

PLUG IN USBs

Connect Commander CORE and LCD Kit to 2x USB 2.0 Headers.

Use included USB Y-Splitter to reduce required USB ports from 2x to 1x.