Page 1
O P E R A T I N G I N S T R U C T I O N S i11s Safety switches...
Page 2
Original document This document is an original document of SICK AG. O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK Subject to change without notice...
Dimensional drawing................Conformities and certificates............15 EU declaration of conformity..............8027740/1FVF/2022-05-19 | SICK O P E R A T I N G I N S T R U C T I O N S | i11s Subject to change without notice...
(yy = year, ww = calender week). These operating instructions are original operating instructions. O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK...
Restrict access to replacement actuators, so they cannot be used for bypassing. O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK...
Figure 2: Minimum approach radius (the pivot point for the door must be in the same plane as the insertion opening for the actuator) 8027740/1FVF/2022-05-19 | SICK O P E R A T I N G I N S T R U C T I O N S | i11s Subject to change without notice...
Cover the control slot, the actuator and the rating plate when painting. Use only solvent- free cleaning materials when cleaning the safety switch. O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK...
Tighten the clamping bolts of the switching elements by 0.5 Nm. 8027740/1FVF/2022-05-19 | SICK O P E R A T I N G I N S T R U C T I O N S | i11s Subject to change without notice...
Page 10
Take account of the density of the line entrance. Close switch cover and tighten screws. O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK...
Safety switches must be completely replaced after 1 million switching operations. 8027740/1FVF/2022-05-19 | SICK O P E R A T I N G I N S T R U C T I O N S | i11s Subject to change without notice...
Always dispose of serviceableness devices in compliance with local/ national rules and regulations with respect to waste disposal. O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK...
Head screw 0,8 Nm Minimum approach radius see figure 2 8027740/1FVF/2022-05-19 | SICK O P E R A T I N G I N S T R U C T I O N S | i11s Subject to change without notice...
(M5) Figure 5: Dimensional drawing i11S-S213 (A, B, C, D: Directions of approach) O P E R A T I N G I N S T R U C T I O N S | i11s 8027740/1FVF/2022-05-19 | SICK...
• ROHS DIRECTIVE 2011/65/EU • MACHINERY DIRECTIVE 2006/42/EC 8027740/1FVF/2022-05-19 | SICK O P E R A T I N G I N S T R U C T I O N S | i11s Subject to change without notice...
Page 16
Phone +7 495 283 09 90 E-Mail info@sick.com E-Mail office@sick.com.gr E-Mail info@sick.ru Vietnam Hong Kong Singapore Phone +65 6744 3732 Phone +852 2153 6300 Phone +65 6744 3732 E-Mail sales.gsg@sick.com E-Mail ghk@sick.com.hk E-Mail sales.gsg@sick.com Detailed addresses and further locations at www.sick.com SICK AG | Waldkirch | Germany | www.sick.com...
Need help?
Do you have a question about the i11s and is the answer not in the manual?
Questions and answers