Advertisement
Care and Cleaning
□
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
□
To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly
dampened, clean cloth to wipe the exterior surface of the fixture.
Troubleshooting
Problem
The bulb will not light.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
Service Parts
MODEL TYPE : 28235 28236
AA
EE
Part
Description
AA
Mounting bracket
Mounting screw
BB
(Pre-assembled to mounting bracket (AA))
CC
Outlet box screw
Green ground screw
DD
(Pre-assembled to mounting bracket (AA))
Possible Cause
The bulb is burned out.
The power is off.
The power cord is not plugged in.
The circuit breaker is off.
There are crossed wires, or the power
wire is grounding out.
BB
FF
Quantity
1
2
2
1
Solution
Replace the bulb.
Ensure the power supply is turned on.
Ensure the power cord is plugged into the outlet.
Ensure the circuit breaker is set to the "ON" position.
Discontinue use of the lamp. Check the wire connections.
Contact a qualified electrician or call the Customer Care
Service Team at 1-855-HD-HAMPTON.
CC
GG
Part
Description
EE
Hex nut
FF
Wire connector
GG
Rubber washer
HH
Cap nut
6
DD
HH
Quantity
2
3
2
2
Advertisement
