5. Setting up the rear tyre (Picture 9,10,11)
Loosen the nut on the rear axle, tear off the tape on the axle, pass through
the tyre with right direction , then fasten the nut.
Picture 9
6. Setting up the rear cargo shelf,and finish setting up (Picture 12)
7. Test drive
Fill the fuel tank and check the lubrication oil level, then start the pull start
to test drive to check.
YOUTH ATV SAFETY TRAINING COURSE
MINIMUM NUMBER OF REPRETITIONS OF RIDING
MANEUVERS FOR FIRST-TIME OPERATORS
Picture 10
Picture 12
LUYUAN, INC
8
Picture 11