Drive Chain Adjustment - X-PRO Y-6 User Manual

Loosen the No. 1 and No. 4 bolts on the rear axle carrier , and adjustment
No.2 and No.3 bolts in comfortable position, then tighten No.1 and No.4 bolts
for tensioning the chain. the driven chain should be 5mm ( 0.2 in) marking
sure not to over tighten the chain.
It is important to lubricate the chain regularly to avoid excess wear. This will
prolong the lifetime of the chain. It is important to lubricate the chain after
every ride and especially in wet conditions. It is recommended to use a
quality chain lubricant. If the chain needs replacement, then please also check
the front and rear sprockets for wear, replace accordingly.
Riding with a chain in poor condition or improperly adjusted
can lead to serious injury. Always, inspect, adjust and
maintain the drive chain properly before each ride.

DRIVE CHAIN ADJUSTMENT

20