Unpacking And Setting Up Handlebar - X-PRO Y-6 User Manual

UNPACKING AND SETTING UP HANDLEBAR

You ATV is packed with folded handlebars and brake lever. After unpacking,
first take out the aluminum block form the tools bag, then set up the
handlebars to a comfortable position and tighten the handlebar bolts. the bolt
of brake lever and the throttle grip has been tightened .Do not use an
excessive force to tighten this bolts. Over tightening the bolts may cause
damage of the threads or other parts. Verify the smooth and free movement of
both control cables (throttle and brake) .
Controls:
1. Engine stop switch
2. Emergency shut down switch
3. Brake button
4. Throttle grip
13