User Manual - X-PRO Y-6 User Manual

User must read and understand the warning labels well.
User must comply with these warning labels and to keep these labels.
If any of these labels are lose or hazily, please ask dealer to get the labels.
1. Make sure to check ATV before use , it is important .
2. Make sure to put on safety helmet and some other necessary safeties
before driving the ATV, and abide by local highway code.
3. Make sure there is enough oil in the fuel tank before driving. Press the
switch, open the oil stop, and pull the line of pull start to start up the ATV.
4. Pls careful to using the throttle control handle. The ATV will run faster
when the accelerogragh is bigger given .When turning left or right ,pls
attention our speed. The right handle control the front disc brake, and the
left handle control the rear disc brake. In the left handle, there is a red
button, it is emergency shut down switch, used for stopping the ATV.
When you pull out the button, the ATV will stop immediately.
5. If you want to stop the engine working ,pls press the red switch "OFF".
6. In the right handle ,there is limiting-speed device, User can add speed
from up to down by adjusting the device.
Warning: user must abide by the local highway code and the
Each purchaser have the opportunity to register for
free hands-on ATV training through the ATV Safety Institute (ASI)
at the time of purchase.Take an ATV Rider course ;

USER MANUAL

safety statute.
ATTENTION
call 800 887 2887 or visit
WARNING
www.atvsafety.org
11