Table of Contents
Advertisement
ANTI-ODOUR TECHNOLOGY
Shark's Anti-Odour Technology
cartridge guards against bad odours
inside your vacuum�
ANTI-ODOUR
TECHNOLOGY DIAL
Flip up the handle and rotate the Anti-Odour dial to adjust
Anti-Odour Technology intensity or to unlock the dial for
cartridge access�
Insertion/Removal: Rotate the Anti-Odour Technology dial to align the teal arrows�
Remove the dial to access the odour cartridge for removal or replacement�
High: Rotate the Anti-Odour Technology Dial toward the High position for the highest
level of intensity when the vacuum is in use� This position is the recommended setting
for optimal performance�
Medium: Rotate the Anti-Odour Technology Dial toward the medium position to
decrease the intensity of the odour when the vacuum is in use�
Low: Rotate the Anti-Odour Technology Dial toward the Low position to minimise the
intensity to the lowest level when the vacuum is in use�
ANTI-ODOUR TECHNOLOGY TIPS
The Anti-Odour Technology Dial Must be Installed for Vacuum to Function Properly
• Remove the anti-odour cartridge from dial if you don't want the benefits of the Anti-Odour
Technology�
Maintenance Required
• Clean all filters as recommended under Cleaning Filters�
• Empty your dust cup before storing your vacuum�
• Replace the cartridge as recommended under Anti-Odour Technology Cartridge Replacement�
• Visit sharkclean�co�uk to learn more and purchase replacements�
Fragrance Strength Over Time
• The intensity of the Anti-Odour Technology's fragrance may diminish over time� It may also
have no noticeable fragrance at all� This is natural and does not indicate the technology isn't
working� Follow replacement instructions to ensure continued performance�
NOTES: • The odour dial needs to be installed for the vacuum to function properly, with or without the odour cartridge�
• Wash hands thoroughly after handling� If irritation or rash develops, seek medical advice/attention�
• Odour cartridges should be replaced every 6 months for optimal Anti-Odour Technology performance�
10
s h a r kc l e a n . c o . u k
SETTINGS
ANTI-ODOUR TECHNOLOGY
ANTI-ODOUR TECHNOLOGY CARTRIDGE REPLACEMENT
1. REMOVE ODOUR DIAL
FROM FLOORHEAD
Flip up the handle and rotate the Anti-Odour
Technology dial clockwise until the two teal arrows
are aligned� Pull the handle to remove the Anti-Odour
Technology Dial from the floorhead�
3.REMOVE NEW
CARTRIDGE FROM CAN
Remove the new Anti-Odour cartridge from
the can� To maintain the life of the cartridge, keep it in
the can until you are ready to install it�
5. INSTALL DIAL IN FLOORHEAD
Align the teal arrow on the dial cover with the teal
arrow on the floorhead� Then reinsert the dial into the
floorhead� Rotate the dial anticlockwise to an intensity
setting to engage� Rotate further to change the
intensity setting to high, medium or low�
For replacement Anti-Odour Technology cartridges please visit sharkclean.co.uk
2. REMOVE OLD ODOUR
CARTRIDGE
Rotate the cartridge anticlockwise in the dial
housing and pull out the cartridge to remove it�
TURN UNTIL
CLICK TO LOCK
4. INSTALL NEW
CARTRIDGE IN DIAL
Align the yellow arrow on the side of the cartridge with
the yellow arrow on the side of the dial cover, then
insert the cartridge into the dial� Rotate the cartridge
clockwise to lock it in place�
6. USED CARTRIDGE
DISPOSAL
Dispose of old cartridge into the bin� Please do not
throw the anti-odour technology dial into the bin�
s h a r kc l e a n . c o . u k
11
Advertisement
Table of Contents
