Cleaning - Moffat Grab& Go D1GH Operating & Service Manual

11: Cleaning

1. Disconnect unit from mains and wait until appliance has cooled.
2. Wipe clean using hot, soapy water and soft, non-abrasive cloth. Ensure that
the stainless steel is wiped in straight strokes following the grain of the material.
3. Wipe dry using a clean cloth. Do not use scouring pads or abrasive cleaners
of any type. Shelving and select inner panels can be removed to allow
a deeper internal clean. Ensure all panels and fixings are replaced after
cleaning operation.
4. Wipe down sneeze screen and glass top with a damp, clean cloth.
5. Finish by carefully drying with a soft dry cloth or Kitchen Towels.
Do not use scouring pads or abrasive cleaners of any type.
Do not use Solvents, bleach, Caustic Cleaners
or biological powders on any surface.
Special care should be taken around electrical
parts, avoided excessive use of water.
Take special care when cleaning glass
use a soft duster & glass cleaner spray.
Before attempting to clean the unit, please ensure that the Unit
is isolated from the electric supply and allowed to cool down,
with all food plates and other Dishes removed from the unit.
Do not use a water jet or pressure
spray to clean this appliance.
11: Cleaning
7