Table of Contents
Advertisement
1: Electrical Specification
Live (L1)
L2
L3
Neutral
Earth
2: General Installation
This equipment is designed to be operated by suitably
qualified persons. It is the responsibility of the Supervisor
or equivalent to instruct users, provide suitable P.P.E.,
show the mains isolating switch location, and inform users
that parts may become hot, causing injury if touched.
1.
Remove all packaging & plastic coatings
from the appliance. Check for any damage.
2.
Assemble all parts, including shelves, food containers etc.
3.
Ensure all switches and thermostat controls are in the OFF position.
4.
Connect the mains input plug to the socket outlet.
5.
Turn on and check the unit is functioning correctly.
This appliance must be earthed and damaged cables
must be replaced by a suitably qualified person!
1 Phase Cable
Brown
X
X
Blue
Yellow & Green (Striped)
A mains cable, type H07RN-F, conforming to
code designation 60245 IEC 57, is supplied.
3 Phase Cable
Brown
Black
Grey
Blue
Yellow & Green (Striped)
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Grab& Go D1GH and is the answer not in the manual?