Gainsborough K274 Manual

Solar Butterfly Mobile
K274
v001: 11/01/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed
from the packaging.
Before using first time
Allow lamp to charge for at least 8 hours in full sunlight with the ON/OFF
switch in the ON position. The ON/OFF switch is located under the solar panel.
Once the batteries are fully charged, set the ON/OFF switch to ON. If the lamp
does not turn on after dark refer to Maintenance section.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least
8 hours per day. The number of hours the light will illuminate is directly
proportional to the hours of sunlight it receives. If the light is placed in a
shaded area, it will not be able to fully charge and its illumination time will be
limited. Do not place the light near other outdoor lighting like porch or
streetlights. These may fool the sensor and keep the light from coming on, or
cause it to turn off automatically
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
(H) 100 x (W) 15 x (D) 15cm
Material
Metal, Polystyrene
Battery
1 x AA 1.2V 300MAH NI-MH RECHARGABLE
•
PRETTY SOLAR BUTTERFLY MOBILE THAT WILL
DELICATELY 'DANCE' IN THE WIND
•
WITH 16 INTRICATELY CUT OUT BUTTERFLIES IN A
MIX OF COLOURS THAT CASCADE DOWN FROM THE
TOP OF THE MOBILE
•
SCATTERED WITH WARM WHITE LEDS (not
replaceable) POWERED BY THE BUILT IN SOLAR
PANEL AT NIGHT TIME IT LOOKS MAGICAL LIT UP
WITH THE BACKDROP OF A GARDEN
•
HANG FROM A TREE, HOOK, SIT BACK AND ENJOY!
•
100X15X15CM