Gainsborough K320 Instructions For Use

Wall Art with Solar Light
K320
v001: 18/10/21
Please read and retain these instructions for future reference
K320 BUT – Butterfly Wall Art with
Solar Light
Dimensions
Bird: (H) 35x (W) 27 x (D) 13 Butterfly: (H)35 x (W)29 x (D) 13cm
Material: Steel, Glass, Plastic
Batteries: 1 xAA NiMh 300mah (included) (replaceable)
•
SUMMERY AND COLOURFUL WALL DÉCOR WILL ADD VIBRANCE TO ANY GARDEN FENCE, SHED,
WALL ETC AND AT NIGHT THE CLASSIC SOLAR LANTERN WILL AUTOMATICALLY ILLUMINATE
•
WHITE LIGHT (LEDs not replaceable)
•
NO TRAILING WIRES OR RUNNING COSTS
•
INTEGRAL HANGING HOOK JUST USE REGULAR WALL FIXINGS (FIXINGS NOT INCLUDED)
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the
packaging.
Before using first time
Allow lamp to charge for at least 8 hours in full sunlight with the ON/OFF switch in the ON
position. The ON/OFF switch is located under the solar panel. Once the batteries are fully
charged, set the ON/OFF switch to ON. If the lamp does not turn on after dark refer to
Maintenance section.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
ALWAYS POSITION IN DIRECT SUNLIGHT
K320 BIRD – Bird Wall Art with
Solar Light