Table of Contents
Advertisement
Quick Links
Thank you very much for choosing the Yoshitake's product. To ensure the correct and safe use of the product,
please read this manual before use. This manual shall be kept with care for future references.
The symbols used in this manual have the following meanings.
Warning
Caution
1. Specifications ··························································· 1
2. Dimensions ······························································ 1
3. Operation ································································ 2
4.1 Selection of nominal size ········································ 2
4.2 Selection of nominal pipe size ································· 2
4.3 Pressure Loss Chart ············································· 3
5.1 Precaution for installation ······································· 4
5.2 Precaution for operation ········································· 4
6.1 Precaution for disassembly and inspection ················· 5
6.2 Precaution for reassembly ······································ 5
7. Piping Example ························································· 5
MODEL SY-8
STRAINER
PRODUCT MANUAL
This symbol indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury.
This symbol indicates a hazardous situation that, if not avoided, may result in
minor or moderate injury or may result in only property damage.
Table of Contents
.
■ EP D T-048■
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yoshitake SY-8
Summary of Contents for Yoshitake SY-8
-
Page 1: Table Of Contents
STRAINER PRODUCT MANUAL Thank you very much for choosing the Yoshitake’s product. To ensure the correct and safe use of the product, please read this manual before use. This manual shall be kept with care for future references. The symbols used in this manual have the following meanings. -
Page 2: Specifications
1. Specifications Application Steam, Air, Cold and hot water, Other non-dangerous fluids Max. pressure 1.0 MPa Max. temperature 150 °C (250 °C ) * Body Cast stainless steel Material Screen Stainless steel Gasket PTFE * 15A to 100A = φ2.5 - 7.21 holes/cm Perforations 125A to 150A = φ6 - 2.05 holes/cm Screen... -
Page 3: Operation
3. Operation Parts Name Body Cap (15A-50A) Cover (65A-150A) Screen Gasket Plug 15A - 50A 65A - 150A Dust, scale, and other foreign substances which flow into the inlet side of the strainer are removed by the screen [3]. 4. Nominal Size Selection To make the best use of the strainer and satisfy the operating requirements to the maximum, take notice of the following. -
Page 4: Pressure Loss Chart
4.3 Pressure Loss Chart [Screen] 15A to 100A = φ2.5 - 7.21 holes/cm Mesh = 80 mesh 125A to 150A = φ6 - 2.05 holes/cm Mesh = 80 mesh Nominal size ΔP: Pressure loss MPa ■ EP D T-048■... -
Page 5: Maintenance
5. Maintenance 5.1 Precaution for installation Caution 1. When installing, check the direction of the product so that the fluid flowing and the arrow marked on the product are in the same direction. * Setting the product in wrong directions prevents the product from performing as intended. 2. -
Page 6: Disassembly, Cleaning And Reassembly
6. Disassembly, Cleaning and Reassembly Excessive amount of foreign substances inside the product reduces filtration area and hampers fluid flow. If the product is kept for such condition, the screen is damaged and results in adverse effect on the piping system due to excessive pressure difference. 6.1 Precaution for disassembly and inspection Warning 1. -
Page 7: Warranty Information
Fire, flood, earthquake, thunder and other natural disasters. Consumable parts such as O-ring, gasket, diaphragm and etc. Yoshitake is not liable for any damage or loss caused by malfunction or defect of the product. INTERNATIONAL DEPT. 955-5, Miyamae, Irukadeshinden, Komaki, Aichi, 485-0084, Japan...
Need help?
Do you have a question about the SY-8 and is the answer not in the manual?
Questions and answers