3. To remove the memory module:
a. Pry apart the memory module latches [1].
b. Lift and remove the memory module from the system board [2].
Installing the memory module
Steps
1. Insert the memory module into its connector on the system board.
2. Gently push the memory module until the latches snap it into place.
3. Install the:
a.
battery
b.
base cover
4. Follow the procedure in
Hard disk drive (HDD)
Removing the hard disk drive (HDD)
Steps
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the HDD:
a. Disconnect the HDD cable from the system board [1].
20
Removing and installing components
After working inside your
Before working inside your
computer.
computer.